Refractory Mortar-Types and Construction Practice
Types of Refractory Mortars
There are two types of refractory mortar conforming to ASTM C 199 and permitted by code:1. Hydraulic-setting Mortar
It is also called non-water-soluble refractory mortar and considered the best available refractory mortar. Hydraulic-setting mortar is a mixer of aggregate and binder and withstand temperature of 1499C for a minimum of 6 hours. Outstanding properties of non-water-soluble refractory mortar include acid resistant, water insoluble, and it is the only type of refractory mortar which is recommended for setting clay flue liners. The hydraulic setting mortar is similar to Portland based mortar in terms of workability and curing. Moreover, It is easier to ship and store than premixed. This type of refractory mortar comes dry in bags and is not subject to separation, hardening, or freezing before it is used. Lastly, it can be used to lay the firebrick, set the throat and smoke chamber, set clay flue liners, and outdoor applications.
Fig. 1: Hydraulic-setting mortar
Fig. 2: Clay Flue liner
2. Premixed or Air-drying Mortar
Premixed refractory mortar is a mixer of clays, aggregates, and a liquid silicate as a binder. The properties of such mortar are inferior to hydraulic setting mortar. For instance, it dissolves in water after drying and require long time to dry in wet environment. Added to that, premixed or air-dry mortar may cause efflorescence. Moreover, it comes ready to use in pails about the consistency of a drywall compound, and may be thinned with a little water. Furthermore, air drying mortar is preferred in hot and dry environment because it does not dry out quickly in comparison with other mortar types. It is used in the construction of kilns and furnaces. Finally, it sets quickly after laying and can be clean easily since it dissolves in water.
Fig. 3: Air Drying Mortar
3. Jobsite Mixed Mortar
This type of mortar is out of favor nowadays and it is produced using sand, fire clay, Portland cement, and lime. This type of mortar resists high temperature but after it has cooled down, it would loss the binder and hence no longer perform its function. Therefore, this type of mortar is not recommended for locations which are exposed to high temperature regularly.Practical Tips for Refractory Mortar
- Generally, maximum thickness of refractory mortar in high quality oven is 6 mm.
- If mortar thickness is greater than 6 mm, it shrinks and left space between bricks and eventually allow bricks to move.
- Mortar thickness greater than 6mm is allowed for locations away from the hot face.
- Refractory mortar shall be used only for the brick structure to stay strong and stable. It shall not be left exposed on the hot-face.
- Refractory mortar is not applicable for filling holes or big spaces or gaps between firebricks.
- Use recommendation of applicable code to specify number of days between the end of construction and exposing the mortar to high temperature.
Fig. 4: Laying Bricks Using Refractory Mortar