The Constructor

How to Estimate Concrete Costs?

Reading time: 1 minute

Concrete work in a project usually holds the maximum in terms of overall cost and work quantity. It becomes an important step to calculate the concrete related costs while preparing a project estimate. The cost of concrete depends upon the cost of materials, mix design, workforce, and machinery. 

In this we calculate the cost of 1 cubic meter of concrete and other expenses that occur in the preparations of concrete.

Factors that A the Cost of Concrete

1. Material Costs

Costs of materials and supplies and the associated shipping charges influence the cost of any concrete construction project.

2. Labor Rates

The local labor rates or wages specified by the state affect the expenditure of a project.

3. Site Conditions

The location and the prior site condition affect the cost of the project and concrete. Poor soil quality, wetlands, contamination, utility, environmental and traffic issues are few examples in this category.

4. Schedule

If the project schedule is too short for the type of work involved, then project costs tend to be on the higher side. This is especially true for projects with a significant liquidated damage clause in their contracts.

5. Contingency

A 10% contingency fund of the total expenditure is generally set aside by cement contractors to cover unforeseen costs. However, inflation and scarcity of materials and supplies might require a higher contingency of the range of 15-20%.

Calculation of Cost for 1m3 of Concrete

Let's consider the concrete mix of M15 (1:1.5:3), where, 1 is the part of cement, 1.5 is the part of fine aggregates and 3 is the part of coarse aggregates of size of 20mm. The water-cement ratio required for mixing of concrete is taken as 0.45.

1. Assumptions:

Bulk Density:
1. Cement = 1500 kg/m3
2. Sand = 1700 kg/m3
3. Coarse aggregates = 1650 kg/m3

2. Calculation of Materials for 
1m3 Concrete 

Dry volume = Wet Volume X 1.54
Volume of cement required = (Dry volume X Cement ratio)/ Sum of ratio
Volume of Cement = (1 X 1.54)/(1+1.5+3)
= 1.54/5.5
= 0.28m3
Weight of the cement = 0.28 X 1500
= 420 kg.

Volume of Sand = (1.5 X 1.54)/(1+1.5+3)
= 2.31/5.5
= 0.42m3
Weight of the Sand = 0.42 X 1700
= 714 kg.

Volume of Course Aggregate= (3 X 1.54)/(1+1.5+3)
= 4.62/5.5
= 0.84m3
Weight of the Course Aggregate = 0.84 X 1650
= 1386 kg.

3. Cost Calculation

Cost of cement for 1 m3 =
No of Bags = 420/50
=8.4 Bags
As per latest market rate, cost of 1 bag of cement is taken as Rs: 450
= 8.4 X 450 
= 4200 Rs

Cost of sand for 1 m=
As per latest market rate, cost of 1 m3 of sand is taken as Rs: 1400
= 0.42 X 1400
= 588 Rs

Cost of course aggregate for 1 m=
As per latest market rate, cost of 1m3 of course aggregate is taken as Rs.2400
= 0.84 X 2400
= 2016 Rs

Therefore total cost of 1m of M15 concrete is
=Cost of cement + sand + course aggregate
= 4200 + 588 + 2016
Say Rs 6400

Additional Cost of Concrete

The above cost given is just for the raw materials of concrete. The complete cost of concrete includes the cost of mixing, transporting, compaction equipment, reinforcement, formwork and labour charges.


Fig 1: Manual mixing of concrete.

The cost involved in the transportation of materials into the mixer and the mixer charges are added to the concrete.

2. Transportation

The mixed concrete is to transported to the concreting location with the help of machines and labours.

3. Compaction

The charges involved in the usage of compaction machines such as and other tools are also added up to the total cost of .

Fig 2: Compaction of concrete using hand vibrator.

4. Reinforcement

Fig 3: Reinforcement for concrete.

If the concrete is reinforced, the cost of steel and labour charges for the cutting and tieing of rebars is also calculated and added to the concrete works.

5. FormWork or Shuttering

If the concrete work is done for beam, columns or slab, the formwork required to hold the concrete is also added.

Fig 4:  Form work for column concreting.

6. Skilled Labour

The man force required to mix, transport, place, compact and finish the concrete is added to the concreting work cost.

Fig 5: Labours finishing the concrete work.

Read More: 8 Types of Cost Estimates in Construction

Exit mobile version