Compounds in cement mainly are tricalcium silicate, dicalcium silicate, tricalcium aluminate, and tetracalcium alumino ferrite. Not only do these compounds control most of cement properties but also reacts with water to produce new materials (cement hydration) and consequently responsible for ...
Material Testing Guide
Home/How To Guide/Material Testing Guide/Page 6Do you need to remove the ads? Join now!
Category: Material Testing Guide
Materials testing is a technique used to determine the physical & mechanical properties of raw materials, composite materials and ceramics.
Discy Latest Articles
Tests on Metallic Sheathing Ducts – Workability, Transverse Load, Tensile Load, and Water Loss Test
The sheathing ducts are used in Pre and Post tension of concrete members to create a void in the concrete, through which the cables/tendons are inserted and remain free to stretch during stressing operation. The sheathing ducts are available in ...
Bitumen Extraction Test
Bitumen Extraction Test is used to determine the percentage of bitumen content present in the asphaltic pavement by cold solvent extraction. The properties of flexible pavement such as durability, compatibility, and resistance from defects bleeding, raveling, and aging of flexible pavement ...
Cold Weather Concreting: Guidance, and Strategies
Cold weather concreting is the process of placement, finishing, curing, and protection of concrete during cold weather, as per ACI 306.1. The cold weather occurs when the average outdoor temperature is below 4.4C (40F) for more than three successive days. ...
Determination of Dry Density of Soil by Water Displacement Method
Water displacement test method is used to determine the dry density of soil. It is suitable for evaluating in-place dry density of cohesive soil due to the nature of specimen required. The soil sample should be trimmed to obtain a ...
Determination of In-situ Soil Dry Density by Sand Replacement Method
The sand replacement test method is used to determine in situ dry density of soil. The procedures, materials, equipment, and specifications of this test is based on the Indian Standard (IS 2720 part 28). This test is of significant importance ...
Double Shear Test on Mild Steel
Double shear test is used to determine the shear strength (ultimate shear stress) of the mild steel specimen. Universal testing machine (UTM) is used for performing double shear test. There are two types of UTM namely: screw type and hydraulic ...
Test for Setting Times of Concrete Mixture Based on ASTM C403M-16
The penetration resistance test used for the determination of initial and final setting time of concrete mixture in laboratory and project site, and the effects of variables, such as water content; type and amount of cementitious material; or admixtures, upon ...