Lime-Soil stabilization is the process of adding lime to the soil to improve its properties like density, bearing capacity etc. Various factors affecting lime-soil stabilization are soil type, lime type, lime content used, compaction, curing period and additives which are ...
Soil
Home/Material Testing Guide/Soil/Page 2Do you need to remove the ads? Join now!
Discy Latest Articles
Differences Between Coarse-Grained and Fine-Grained Soil

Coarse-grained soil and fine-grained soil are two different types of soil that can be identified based on their texture or ‘feel’ and particle size. It is very crucial to observe the range of particle sizes in soil as it heavily ...
Consolidation Test on Soil by Consolidometer or Oedometer

Consolidation Test is used to determine the rate and magnitude of settlement in soils. The settlement values obtained by this test are due to primary consolidation only which is 90% of the total consolidation. The results of consolidation test are ...
Various Codes for Construction Material Testing

Various standard codes for testing of construction materials are specified by ASTM international, Eurocodes, IS Codes, BS Codes, etc. These codes specifies testing procedure and methods for concrete, masonry, aggregates, steel, soil and other building materials. Codes and standards are ...
Different Types of Soil – Sand, Silt, Clay and Loam

Soil can be defined in many ways. In civil engineering, soil is a naturally occurring, loose/un-cemented/weakly cemented/relatively unconsolidated mineral particles, organic or inorganic in character, lying over the bed rock which is formed by weathering of rocks. Soil is formed ...
Shear Strength of Soil by Vane Shear Test

Vane shear test is used to determine the undrained shear strength of soils especially soft clays. This test can be done in laboratory or in the field directly on the ground. Vane shear test gives accurate results for soils of ...
Determine Water Content of Soil by Oven Dry and Pycnometer Methods

What is Water Content of Soil? The water content of soil is is the ratio of mass of water to mass of soil which is expressed in percentage. Oven Dry Method and Pycnometer Method are commonly used to determine the ...
Shear Strength of Soil by Direct Shear Test

Direct shear test or Box shear test is used to determine the shear strength of the soil. It is more suitable for cohesionless soils. Shear Strength of Soil by Direct Shear Test Shear strength of a soil is its maximum ...