There are various factors that may lead to failure in open and braced deep excavations. Those factors will be discussed briefly. Causes of Failure in Deep Excavations Causes of failure in deep excavation are divided into two subtopics which include: ...
How To Guide
Home/How To Guide/Page 60Do you need to remove the ads? Join now!
Discy Latest Articles
Cost of Reinforced Concrete FRP Strengthening System and other Methods
There are various techniques which are used to enhance both ultimate load capacity and serviceability of reinforced concrete structures. Strengthening reinforced concrete beams with FRP composite is the most novel method which has been developed. This method is widely accepted ...
Checks for Fixing Reinforcements in Formworks of Concrete Structural Members
There are several checks such as condition of reinforcement and formworks, accuracy in steel bar bending, joints and dowel bars, etc. need to be carried out prior to the embedment of reinforcements into the formwork. Checks for Fixing Reinforcements in ...
Concrete Resurfacing – Repair of Concrete Floor or Pavement Surfaces
Concrete resurfacing is a method of rehabilitation of tone or damaged concrete floor or pavement surfaces to make it available for use without the reconstruction of the whole structure. Before undergoing any kind of method as a part of resurfacing ...
Working at Heights in Construction – Regulation and Precautions
Working at heights in construction works is associated with hazards and accidents. Thus, safety procedures are of utmost importance while working at heights. At least 50-60 deaths are accounted per year in construction projects with number of injuries around 4000 ...
Types of Sealants Used for Joints in Buildings -Properties, Uses, Working
Sealant is a material which is used to seal the joints between materials such as concrete, glass, aluminum, masonry wall etc. In general joints are provided in the structures to prevent the damage produced by stresses. Properties of Good Sealant ...
What are the Types of Mechanical Splices for Rebars?
Mechanical rebar splices for rebars in concrete construction is an effective method of joining reinforcing bars. These are designed based on codes of standard practice.
Reinforcement Calculator – Areas of Different Diameters and Numbers of Rebars
In design of reinforced concrete structures, areas of reinforcements for different diameters and numbers of rebars are required for specifying rebar details.