There are various tests on water to check its quality for suitability of concrete construction. These tests on water for concrete construction is discussed. Quality of water for construction use is determined in the laboratory. This test is done as per clause 3.1.1 of IS 3025.
In civil engineering projects, large quantity of different materials are used and it is necessary to test these materials according to certain set patterns within desirable frequency of testing in order that the quality of final product is maintained.
Water Quality Tests for Concrete ConstructionFollowing are the tests required for quality of water for Concrete construction purpose:
- pH value test
- Limits of acidity test
- Limits of alkalinity test
- Percentage of solids
- Suspended matter
- Inorganic solids
- Organic solids
Frequency of testing of waterWater from each source shall be got tested before the commencement of work and thereafter once in every three months till the completion of the work. Water from municipal source need to be tested only once in six months. Number of tests for each source shall be three.
Recommended Limits for Concrete Construction Water TestsWater used for mixing and curing shall be clean and free from injurious quantities of alkalies, acids, oils , salts, sugar, organic materials, vegetable growth or other substance that may be deleterious to bricks, stone, concrete or steel. Potable water is generally considered satisfactory for mixing. The pH value of water shall not be less than the following concentrations represent the maximum permissible values (of deleterious materials in water): a) Limits of acidity: To neutralize 100ml sample of water, using phenolphthalein as an indicator, it should not require more than 5ml of 0.02 normal NaOH. The details of test shall be as given in IS 3025 (Para 22). b) Limits of alkalinity: To neutralize 100ml sample of water, using mixed indicator, it should not require more than 25ml of 0.02 normal H2SO4. The details of tests shall be as given in IS 3025 (Para 23). c) Percentage of solids: Maximum permissible limits of solids when tested in accordance with IS 3025 shall be as under:
|Types of solids||Limits|
|Organic solids||200 mg/liter|
|Inorganic solids||3000 mg/liter|
|Chlorides||2000 mg/liter for concrete not containing embedded steel, and 500 mg/liter for reinforced concrete work|
|Suspended matter||2000 mg/liter|