Register Now

Login

Lost Password

Lost your password? Please enter your email address. You will receive a link and will create a new password via email.

Login

Register Now

Category : Concrete Work Procedure

Concrete work procedure for various types of concrete such as foundation, columns, beams, slabs, floors and other reinforced concrete structures.

Concrete Topping Slab -Types, Thickness and Uses

Concrete topping slab is an overlay designed to provide a dense, abrasion-resistant, and a finished floor surface for multiple purposes such as providing a wearing course to support traffic loads in parking facilities and bus terminals, providing a ...

How to Pour Concrete Foundation?

Pouring concrete foundation is a considerably important phase of foundation construction and plays a vital role in the success of a project. Proper planning, suitable equipment selection, and good placement practice shall be adopted for concrete pouring of ...

Concrete Slab Types – Construction, Cost, and Applications

A reinforced concrete slab is a crucial structural element and is used to provide flat surfaces(floors and ceilings) in buildings. On the basis of reinforcement provided, beam support, and the ratio of the spans, slabs are generally classified ...

How to Pour New Concrete Over Old Concrete Surface?

New concrete is commonly poured over old concrete, which may have been damaged for any reason, for repairing purpose. However, this approach is not suitable option unless the existing concrete is in good shape structurally.

Topping Concrete – Work Procedure, Types and Advantages

Topping concrete is defined as a layer of high strength concrete placed on an old, worn out concrete surface to provide a dense, abrasion-resistant surface, to increase structural depth and strength of the base concrete.[caption id="attachment_26792" align="aligncenter" width="450"]