NET AREA CALCULATION FOR TENSION MEMBERS When tension members are spliced or connected to a gusset plate by rivets or bolts, some material is removed from the cross-section due to bolt or rivet holes. The net area at any section ...
Discy Latest Articles
SAFETY CONCEPT IN STRUCTURAL STEEL DESIGN
SAFETY CONCEPT IN STRUCTURAL STEEL DESIGN There will be a gap between the internal load and the internal resistance in the members of the structure. The gap is covered in either of the two ways: a) In elastic design the ...
Types of Tension Members in Structural Steel Construction
Types of Structural Steel Tension Members A tension member is designed as a structural member subjected to tensile force in a direction parallel to its longitudinal axis. A tension member is also called a tie member or simply a tie. ...
Classification of Steel Bridges Based on Traffic, Structure and Carriageway
Classification of steel bridges Steel bridges are classified according to the Type of traffic carried, type of main structural system and the position of carriageway relative to the main structural system. These classification of steel bridges are briefly discussed in ...
Plate Girder Bridges – Details and Design Requirements
Plate girders became popular in the late 1800’s, when they were used in construction of railroad bridges. The plates were joined together using angles and rivets to obtain plate girders of desired size. By 1950’s welded plate girders replaced riveted ...