The structural design process of a complete construction project is divided into three phases Planning, Design, and Construction. The planning phase will consider the various factors that affect the layout and the dimension of the structure. Here, the decision is ...
Discy Latest Articles
Balanced, Under-Reinforced and Over-Reinforced Beam Sections
Reinforced concrete beams are classified as balanced, under-reinforced and over-reinforced based on its reinforcement percentage. Details of these beam sections are discussed.
Types of Concrete Beams and their Reinforcement Details
Reinforced concrete beams are structural members that support the transverse load which usually rest on supports at its end. Girder is a type of beam that supports one or more smaller beam. Types of Concrete Beams Beams are classified as ...
Design of Rectangular Reinforced Concrete Beam
Reinforced concrete beams are structural elements that designed to carry transverse external loads. The loads cause bending moment, shear forces and in some cases torsion across their length. Moreover, concrete is strong in compression and very weak in tension. Thus, ...
Reinforcement Detailing in Beams According to IS 456-2000
Reinforcement detailing in beams Beam carries transverse external loads that cause bending moment, shear forces and in some cases torsion Concrete is strong in compression and very weak in tension. Steel reinforcement counter act tensile stresses in reinforced concrete beams. ...
DETAILING OF RCC BEAMS
Detailing of Beams Beam carries transverse external loads that cause bending moment, shear forces and in some cases torsion Concrete is strong in compression and very weak in tension. Steel reinforcement is used to take up tensile stresses in reinforced ...
Maximum Deflections of Reinforced Concrete Beams and Slabs As per ACI 318
Maximum ratios of computed deflection to span L for beams and slabs as per ACI 318: The Building Code.
Trussed Beam- Design Principles and Erection Practices
A beam which is stiffened by a system of braces constituting a truss of which the beam is a chord is called trussed beam. It consists of steel sections (or wooden beams) and struts of steel rods. Trussed beams are ...