![Types of Foundation for Buildings and their Uses [PDF]](https://i0.wp.com/theconstructor.org/wp-content/uploads/2014/11/matfoundation-629x420.jpg)
Types of foundations generally used in buildings are isolated footings, combined footing, raft or mat foundations, strip foundation, pile and drilled shafts.
Discy Latest Articles
Compressive Strength of Concrete -Cube Test [PDF], Procedure, Results
![Compressive Strength of Concrete -Cube Test [PDF], Procedure, Results](https://i0.wp.com/theconstructor.org/wp-content/uploads/2014/04/compressive-strength-test-on-concrete-cubes-629x420.jpg)
Compressive strength of concrete cube test provides an idea about all the characteristics of concrete. Cube test results judges proper concreting at site.
16 Types of Heavy Equipment Used in Construction
Heavy construction equipment are used for various purposes in large projects. Selection of different types of heavy equipment depends on the size of the work and economy of the project. These make construction process easier and faster. Types of Heavy Construction ...
Calculate Quantities of Materials for Concrete -Cement, Sand, Aggregates
Quantities of materials for concrete such as cement, sand and aggregates for production of required quantity of concrete of given mix proportions such as 1:2:4 (M15), 1:1.5: 3 (M20), 1:1:2 (M25) can be calculated by absolute volume method. This method ...
Methods of Rainwater Harvesting [PDF]: Components, Transportation, and Storage
![Methods of Rainwater Harvesting [PDF]: Components, Transportation, and Storage](https://i0.wp.com/theconstructor.org/wp-content/uploads/2011/12/rainwater-harvesting-629x420.jpg)
Methods of Rainwater Harvesting -Broadly there are two ways of harvesting rainwater such as surface runoff harvesting and rooftop rainwater harvesting.
Concrete Mix Design Calculation for M20, M25, M30 Concrete with Procedure & Example
Concrete mix design is required to achieve target strength in structures. Concrete Mix design calculation of M20, M25, M30 grade of concrete are explained with example.
Types of Loads on Structures – Buildings and Other Structures
The types of loads acting on structures for buildings and other structures can be broadly classified as vertical loads, horizontal loads and longitudinal loads.
Concrete Slump Test for Workability: Procedure and Results
To study the workability (determine the consistency) of prepared concrete either in the laboratory or laboratory or during the progress of work in the field and to check the uniformity of concrete from batch to batch.
Types of Concrete Mix Ratio Design and their Strengths
Concrete mix ratios are the proportions of concrete components such as cement, sand, aggregates and water. These mix ratios are decided based on type of construction and mix designs. However, building codes provides nominal and standard concrete mix ratios for ...
Standard Size of Rooms in Residential Building and their Locations
Knowledge of standard size of rooms and their location in a residential building is important for planning of residential construction project. The room sizes and their location provides spaces for movement, sunlight and wind for residents.