Weight sounding test is a form of penetration test conducted at construction sites to assess liquefaction susceptibility, soil profiling, determination of the bearing capacity of shallow and deep foundations, etc. The test consists of two stages, namely, static penetration and rotational penetration, ...
Category: Material Testing Guide
Materials testing is a technique used to determine the physical & mechanical properties of raw materials, composite materials and ceramics.
Discy Latest Articles
Different Test Methods For Workability of Self Compacting Concrete [PDF]
![Different Test Methods For Workability of Self Compacting Concrete [PDF]](https://i0.wp.com/theconstructor.org/wp-content/uploads/2020/05/SCC-629x420.jpg)
Self-compacting concrete (SCC) is a highly flowable, non-segregating concrete that fills uniformly and completely every corner of formwork by its own weight and encapsulate reinforcement without any vibration, whilst maintaining homogeneity. A concrete mix can only be classified as self-compacting ...
What is Dynamic Cone Penetrometer(DCP)? [PDF]
![What is Dynamic Cone Penetrometer(DCP)? [PDF]](https://i0.wp.com/theconstructor.org/wp-content/uploads/2020/05/ft-pic-DCP-629x420.jpg)
Dynamic Cone Penetrometer, or DCP, is a tool used for evaluating the strength of soils on site. It also helps with monitoring the condition of granular layers and subgrade soils in pavement sections over time. It can be used to ...
Chemical Requirement of Aggregates as per European Standards [PDF]
![Chemical Requirement of Aggregates as per European Standards [PDF]](https://i0.wp.com/theconstructor.org/wp-content/uploads/2020/04/Chemical-Requirement-of-Aggregates-as-per-European-Standards-629x420.jpg)
The aggregates used in the production of concrete are inert granular materials such as gravel, crushed stone, sand, slag, recycled concrete, and geosynthetic aggregates. The aggregates may be natural, manufactured, or recycled. This article is in continuation of the article: Geometrical ...
Physical Requirement of Aggregates as per European Standards [PDF]
![Physical Requirement of Aggregates as per European Standards [PDF]](https://i0.wp.com/theconstructor.org/wp-content/uploads/2020/04/TEMP-629x420.jpg)
The aggregates used in the production of concrete are inert granular materials such as gravel, crushed stone, sand, slag, recycled concrete, and geosynthetic aggregates. The aggregates may be natural, manufactured, or recycled. This article is in continuation of the article: ...
Geometrical Requirement of Aggregates as per European Standards [PDF]
![Geometrical Requirement of Aggregates as per European Standards [PDF]](https://i0.wp.com/theconstructor.org/wp-content/uploads/2020/04/Geometrical-Requirement-of-Aggregates-as-per-European-Standards-629x420.jpg)
The aggregates used in the production of concrete are inert granular materials such as gravel, crushed stone, sand, slag, recycled concrete, and geosynthetic aggregates. The aggregates may be natural, manufactured, or recycled. In this article, we discuss the geometrical requirement ...
Preliminary Works in Construction [PDF]
![Preliminary Works in Construction [PDF]](https://i0.wp.com/theconstructor.org/wp-content/uploads/2020/04/Preliminary-Works-in-Construction-629x420.jpg)
Preliminary works refer to all the activities that are involved in a construction site before the actual work commences, such as demolition, site clearance, site survey, soil survey, planning, designing, and cost estimation. In this article, we briefly discuss all ...
Aggregates for Concrete as per American Standards – ASTM [PDF]
![Aggregates for Concrete as per American Standards – ASTM [PDF]](https://i0.wp.com/theconstructor.org/wp-content/uploads/2020/04/Aggregates-for-Concrete-as-per-American-Standards-ASTM-629x420.jpg)
The aggregates used in the production of concrete are inert granular materials such as gravel, crushed stone, sand, slag, recycled concrete, and geosynthetic aggregates. The aggregates may be natural, manufactured, or recycled. The aggregates are broadly classified into two types ...