INDER KUMAR YADAV - Answers
Home/ INDER KUMAR YADAV/AnswersDo you need to remove the ads? Join now!
Join TheConstructor to ask questions, answer questions, write articles, and connect with other people. When you join you get additional benefits.
Log in to TheConstructor to ask questions, answer people’s questions, write articles & connect with other people. When you join you get additional benefits.
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
What is the diffrence between lap length and development length?
INDER KUMAR YADAV
Lap length is the length that is provided by overlapping the bars over each other so that they can easily transfer the load from one member to another. acc. to IS456 lapping should not be done for bars greater than 32 mm dia bars And acc. to IS 13920, the lapping should not be done for bars greaterRead more
Lap length is the length that is provided by overlapping the bars over each other so that they can easily transfer the load from one member to another.
acc. to IS456 lapping should not be done for bars greater than 32 mm dia bars
And acc. to IS 13920, the lapping should not be done for bars greater than 36mm dia bars and for joining couplers or welding should be done.
whereas,
development length is the length, which is provided by inserting reinforcement inside concrete so that is can provide enough strength against the tension forces applied to the bars. It is also called as anchorage length.
What is the important of Proctor Compaction Test?
INDER KUMAR YADAV
importance of proctor compaction test to understand the compaction characteristic of different soil with the change in the moisture content. to determine the optimum moisture content at which the given soil become most dense and has maximum dry density In this test, the soil is compacted in the voluRead more
importance of proctor compaction test
In this test,
the soil is compacted in the volume of 945-millimeter cube, and the number of layers is 3, and the hammer weight is 2.45 kg, and the height of the fall is 12 inches.
See lessWhat is the different between development length and anchor length in beam and column?
INDER KUMAR YADAV
development length is the length that is needed to insert in the concrete so that can easily resist the force that is applied whereas anchorage length is the length of bar which is considered to be available when it is bended by some angle and it is provided at the support similarly, the developmentRead more
development length is the length that is needed to insert in the concrete so that can easily resist the force that is applied
whereas
anchorage length is the length of bar which is considered to be available when it is bended by some angle and it is provided at the support
similarly, the development length in the column will be the same as that of beam
from the below image you can understand what I m saying about the development length and anchorage length of beam and column
See lessWhat is best answer of “Introduce Yourself”?
INDER KUMAR YADAV
I think that you can the following steps:- Greet the interviewer (mainly if there is a women interviewer then you should greet her first then you can greet all other member) this step will show show your etiquettes. Tell them your name and tell them about your current status (student or job) Tell thRead more
I think that you can the following steps:-
Which one should be stronger brick or brick bond?
INDER KUMAR YADAV
If both brick and the bond are stronger, then it will be best, but we have to choose one of them then I think it will probably bond between the bricks as the if the bond between the bricks are not stronger then small amount force will be able to break the wall. Also, most of the forces that come toRead more
If both brick and the bond are stronger, then it will be best, but we have to choose one of them then I think it will probably bond between the bricks as the if the bond between the bricks are not stronger then small amount force will be able to break the wall. Also, most of the forces that come to the brick are compression force; therefore, the brick will be able to tackle it completely.
What is the meaning of shear strength in soil?
INDER KUMAR YADAV
The shear strength is the resistance offered by soil against the shear deformation it value is equal to the shear stress on critical plane. The critical plane is that plane on which the resultant has a maximum angle of obliquity with the normal of that plane. Angle of obliquity is the angle on whichRead more
The shear strength is the resistance offered by soil against the shear deformation it value is equal to the shear stress on critical plane.
The critical plane is that plane on which the resultant has a maximum angle of obliquity with the normal of that plane.
Angle of obliquity is the angle on which the resultant stress is most inclined with the normal of that plane. It is also called as internal angle of friction or angle of repose.
See less