OBJECTIVE: i. To find Chezy’s constant for open channels. ii. To find Manning’s Roughness coefficient for the given open channel. iii. To draw the following graphs for two different slopes of channel. iv. Chezy’s constant C vs. Reynolds number. v. ...
Discy Latest Articles
Determination of Darcy’s and Chezy’s Constant for Pipe Flow
OBJECTIVE: i. To determine the Darcy’s and Chezy’s constant for the given pipes, ii. To plot the following graph: Darcy’s constant ‘f’ vs Reynold’s number. Chezy’s constant ‘C’ vs Reynold’s number EQUIPMENT: a) Pipes of 15, 20, 25 and 32 mm ...
Compaction Factor Test for Concrete Workability – Method and Procedure
Compaction factor apparatus’ trowels, hand scoop (15.2 cm long), a rod of steel or other suitable material (1.6 cm diameter, 61 cm long rounded at one end ) and a balance.
Final Setting Time of Cement as per IS:4031-Part 5
Take 400 gm of cement in a pan. Prepare a neat cement paste by adding 0.85 times the water required to give a paste of standard consistency by the previous test. Start a stop watch at the instant when water ...
Initial Setting Time of Cement as per IS 4031, IS 269
Take 400 gm of cement in a pan. Prepare a neat cement paste by adding 0.85 times the water required to give a paste of standard consistency by the previous test. Start a stop watch at the instant when water ...
Determination of Standard Consistency of Cement
The standard consistency is that consistency, which will permit the vicat plunger to penetrate to a point 5 to 7mm from the bottom of the vicat mould when tested as described below.