dbnalawade - Best Answers

Home/ dbnalawade/Best Answers
Ask dbnalawade

Do you need to remove the ads? Get the paid membership

  1. Asked: In:

    What are the best steps for checking reinforcement in R.C.C structure?

    dbnalawade

    dbnalawade

    View Profile
    dbnalawade Expert

    Very important question before providing clearances to pour concrete. I would follow following steps. Ensure Contractor has bar bending schedule and approved drawing. Ensure reinforcement used are approved grade and test certificates are in place. Check  diameter of rebar ( reinforcement) Check spacRead more

    Very important question before providing clearances to pour concrete. I would follow following steps.

    1. Ensure Contractor has bar bending schedule and approved drawing.
    2. Ensure reinforcement used are approved grade and test certificates are in place.
    3. Check  diameter of rebar ( reinforcement)
    4. Check spacing
    5. Check banding radius
    6. Check number of bars
    7. Check laps are of proper length. Some time couplers are used to join the reinforcement. Couplers must be approved.
    8. Check proper cover to rebar is in place.
    9. Covers should be approved
    10. Check the reinforcement installed does not sag  or move. For this ensure you use chairs.
    11. Tie the rebars together using soft annealed lining wire and turn the know inside.
    12. Reinforcement must be clean without any dirt or coating.
    13. Some time special reinforcement steel is provided around openings. Ensure this is in place.
    14. It is normal for QC departments to use check lists for this.

    Hope this helps.

    See less
    • 3
  2. Asked: In:

    What is the Procedure for Foundation Construction of a Building?

    dbnalawade

    dbnalawade

    View Profile
    dbnalawade Expert

    Step by Step procedure for construction of building foundation on an organised construction site can be as below: First step is to write a method statement involving scope of work, references, count and type equipments and labour required and requirements . Ensure you have  approved drawings good foRead more

    Step by Step procedure for construction of building foundation on an organised construction site can be as below:

    1. First step is to write a method statement involving scope of work, references, count and type equipments and labour required and requirements .
    2. Ensure you have  approved drawings good for construction
    3. Prepare BBS for foundations and order reinforcement and ensure materials are on site and correctly stored.
    4. Request survey department to mark foundation centrelines and sizes including working space.
    5. Perform excavation manually or using machines depending on depth, nature of soil and water table. Some time you may to resort to dewatring to keep the water well below the foundation level.
    6. Do not over excavate . Any over excavation should be made top by lean concrete.
    7. Do not expose the foundation level for long time time. Ensure lean concrete is poured as soon as foundation level is reached .
    8. Inspect the foundation level for loose material or soft patches.
    9. Lean concrete is normally 75mm in thickness
    10. Following PCC or lean concrete, install reinforcement including column reinforcement or dowels and shutter the foundation. Use concrete covers of required size at the bottom and sides of reinforcement.
    11. In Middle East they introduce waterproof membranes ( refer: Grace Products)on lean concrete which raps the entire foundation as protection ( also known as tanking)
    12. Once the rebar is in place , with cover you need dust off and get the foundation inspected.
    13. Concrete Pour Card provides you all the checks you need to perform before casting foundations.
    14. You order correct grade concrete + check slump+temperature before concrete is allowed to be poured.
    15. Compact the concrete in layers using vibrators without leading to segregation.
    16. Cast the cubes to test at 7 and 28 days
    17. Cure the cast concrete for minimum of 10 days if it is wet curing
    18. Deshuttering of vertical faces is normally 24 hour to 48 hours.
    19. Once deshuttered and cured foundation is provided with coating or membrane protection.
    20. Finally foundations are backfilled by selected approved fill material in layers of 200mm or less to 95% degree.

    Hope this helps.

     

    See less
    • -3