Join TheConstructor to ask questions, answer questions, write articles, and connect with other people. When you join you get additional benefits.
Log in to TheConstructor to ask questions, answer people’s questions, write articles & connect with other people. When you join you get additional benefits.
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
How can we predict the height of a building without using the equipment?
Trigonometry is the best method which can be used to predict the height of the building without using equipment. But if possible than you can also ask to see the builders plan.
Trigonometry is the best method which can be used to predict the height of the building without using equipment. But if possible than you can also ask to see the builders plan.
See lessWhat is mean by sheroid triangle in the survey?
The triangle which is formed on the earth by three geodesic lines joining three points on a spheroid while performing geodetic survey is known as spheroid triangle. Thank you.
The triangle which is formed on the earth by three geodesic lines joining three points on a spheroid while performing geodetic survey is known as spheroid triangle.
Thank you.
See lessWhy cubes are tested at 3, 7 and 28 days for the Compressive Test?
Cubes are tested at 3 , 7 and 28 days for the compressive test to gain more strength.
Cubes are tested at 3 , 7 and 28 days for the compressive test to gain more strength.
See lessWhat is the best solution for replacing existing lights in order to improve the lighting efficiency of a highway?
Using the following ways, Usage of maximum energy-efficient lighting Usage of a smarter lighting system. Sodium lamp replaced by LED's in a first way Use artificial light as per requirement in the second way Thanks.
Using the following ways,
Thanks.
See lessDifference between Civil Engineering and Bachelor of Architecture ?
Difference between architecture and civil engineering: Â Here I am discussing major differences between architecture and civil engineering, they are as follows: 1) When we talk about duration of course, then Civil engineering- 4 years Architecture- 5 years 2) Responsibility: Â civil engineer: construcRead more
 Here I am discussing major differences between architecture and civil engineering, they are as follows:
1) When we talk about duration of course, then
2) Responsibility:
3) Most important parameter:
4) Eligibility criteria:
5) Focused Area:
Difference between jamb and corbel ?
Jamb and corbel are two different technical terms used in masonry. The difference in between jam and corbel are discussed below; 1) Definition: Jamb- A finished vertical sides of the opening of Window or door is called as a jamb. corbel- A supporting a stone projecting outside from the wall is calleRead more
Jamb and corbel are two different technical terms used in masonry.
The difference in between jam and corbel are discussed below;
1) Definition:
2) Function:
Why only cylinders shape were used to test Split Tensile Strength of Concrete?
Tensile test is done on cylinder because only cylinders can be held under pure tension by applying a compressive load. That will only happen if it was under pure tension. If we take any other prismatic shape such as square cross section cylinder, the failure will be via compression but not tension.
Tensile test is done on cylinder because only cylinders can be held under pure tension by applying a compressive load. That will only happen if it was under pure tension. If we take any other prismatic shape such as square cross section cylinder, the failure will be via compression but not tension.
See less
Srinivas Anumala
Map is a drawing showing the geographical features, facilities, roads, places, water bodies etc.. (natural & built) preferably covering large areas of land & waters. Plan is a drawing showing the proposed construction / development indicating the dimensions / measurements for further implemeRead more
Map is a drawing showing the geographical features, facilities, roads, places, water bodies etc.. (natural & built) preferably covering large areas of land & waters.
See lessPlan is a drawing showing the proposed construction / development indicating the dimensions / measurements for further implementation.