What’s the key difference between arch dam and buttress dam?
Tensile test is done on cylinder because only cylinders can be held under pure tension by applying a compressive load. That will only happen if it was under pure tension. If we take any other prismatic shape such as square cross section cylinder, the failure will be via compression but not tension.
Tensile test is done on cylinder because only cylinders can be held under pure tension by applying a compressive load. That will only happen if it was under pure tension. If we take any other prismatic shape such as square cross section cylinder, the failure will be via compression but not tension.
See less
nikeetasharma
Arch Dam ; Arch dam can be defined as a solid wall, curved in plan, standing across the entire width of the river valley in a single span. The body of arch dam is generally made of cement concrete. Thus, arch dam is just a curved beam, the ends of which are restrained and the way in which the loadsRead more
Arch Dam ;
Arch dam can be defined as a solid wall, curved in plan, standing across the entire width of the river valley in a single span. The body of arch dam is generally made of cement concrete. Thus, arch dam is just a curved beam, the ends of which are restrained and the way in which the loads are resisted is termed a arch action.
Buttress Dam ;
A buttress dam or hollow dam with a solid, water-tight upstream side that is supported at intervals on the downstream side by a series of buttresses or supports. A buttress dam envisages to reduce the total volume of concrete by constricting the material where the stresses are higher and other undesirable features of gravity dam but has higher cement content per cubic metre of concrete than a gravity dam.
See less