Can we place a 500-liter water tank on a 2″ Kadapa slab placed at 6 feet height supported by two solid block walls?
Join TheConstructor to ask questions, answer questions, write articles, and connect with other people. When you join you get additional benefits.
Log in to TheConstructor to ask questions, answer people’s questions, write articles & connect with other people. When you join you get additional benefits.
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Can we place a 500-liter water tank on a 2″ Kadapa slab placed at 6 feet height supported by two solid block walls?
AdityaBhandakkar
Hi, Kadapa shows brittle in property and does not have any elastic nature
It is used only for normal works and not to resist a high load for a long duration.
If possible avoid Kadapa and use a reinforced concrete slab for placing of the water tank. If not possible, then provide 3 walls at a distance of two feet each.
As the height increases the gravity applied on water increases which increases the weight of water. 10 for proper durability, a safe stand must be constructed.
aviratdhodare
Better to lay some treated 150 x 50 pine joists (laid flat) to help spread the load to your block support walls.
AdityaBhandakkar
Hi,
Kadappa stone of 2″ ( 50.8mm ) having its density in the range of 5.0 to 5.4 kg/cm^3 with a water absorption ratio of less than 2%.
After calculation, you may found that at 6-meter height, it is not able to bear the weight of a 500-liter water tank.
Thus, support in the middle must be provided for stability and to increase the bearing strength of kadapa so that it lasts for a long duration.