Join TheConstructor to ask questions, answer questions, write articles, and connect with other people. When you join you get additional benefits.
Log in to TheConstructor to ask questions, answer people’s questions, write articles & connect with other people. When you join you get additional benefits.
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
What are the Roles and Responsibilities of a Utility Engineer in Metro Construction Works?
Why cubes are tested at 3, 7 and 28 days for the Compressive Test?
Cubes are tested at 3 , 7 and 28 days for the compressive test to gain more strength.
Cubes are tested at 3 , 7 and 28 days for the compressive test to gain more strength.
See lessWhat’s the key difference between arch dam and buttress dam?
Arch Dam ; Arch dam can be defined as a solid wall, curved in plan, standing across the entire width of the river valley in a single span. The body of arch dam is generally made of cement concrete. Thus, arch dam is just a curved beam, the ends of which are restrained and the way in which the loadsRead more
Arch dam can be defined as a solid wall, curved in plan, standing across the entire width of the river valley in a single span. The body of arch dam is generally made of cement concrete. Thus, arch dam is just a curved beam, the ends of which are restrained and the way in which the loads are resisted is termed a arch action.
A buttress dam or hollow dam with a solid, water-tight upstream side that is supported at intervals on the downstream side by a series of buttresses or supports. A buttress dam envisages to reduce the total volume of concrete by constricting the material where the stresses are higher and other undesirable features of gravity dam but has higher cement content per cubic metre of concrete than a gravity dam.
See less
How can we use magnetic levitation method in civil engineering?
Soumyadeep Halder
Job Description You will be responsible to Maintain the Utilities to support the Production Process of HDPE Jerry can manufacturing Unit. Compression & Vapour Absorption Based Water Chillers, Air Conditioners, Air Handling Units, Cooling Towers, Air Compressors, Steam Boiler, Water Treatment PlaRead more
Job Description
You will be responsible to Maintain the Utilities to support the Production Process of HDPE Jerry can manufacturing Unit.
Compression & Vapour Absorption Based Water Chillers, Air Conditioners, Air Handling Units, Cooling Towers, Air Compressors, Steam Boiler, Water Treatment Plant, Waste Water Treatment Plant, etc.
‘few pointwise roles and responsibility of utility manager.
1. To monitor and upkeep daily records, shifts, machine wise.
2. To plan Maintenance activities in his concerned section.
3. To monitor daily preventive maintenance scheduled adherence 100%
4. To co-ordinate with OEMs’ in case of machine breakdown.
5. To ensure that gauges fixture and instruments are available on the machine.
6. To ensure that due care is taken while machine are in operated.
7. To ensure that there is no wastage of electrical energy and other resources like water.
8. To maintain the document.
9. To ensure that the following electrical accessories of the machine are in safe condition and not damaged, and lose hanging or lying in unsafe mode –
-> Electrical Wiring
-> Power Socket
->Electrical Plug
->Doors (s) of Electrical plug.
10. Knowledge of TPM, MTBF /MTTR, Electrical Panel, Switch gears, ACB / VCB, VRV, DG sets, Compressor, Six Sigma tools.
See less